tbb/examples/graph/fgbzip2/huffman.cpp

/*
    Copyright (c) 2005-2016 Intel Corporation

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.




*/

/*-------------------------------------------------------------*/
/*--- Huffman coding low-level stuff                        ---*/
/*---                                           huffman.cpp ---*/
/*-------------------------------------------------------------*/

/* ------------------------------------------------------------------
   The original source for this example:
   This file is part of bzip2/libbzip2, a program and library for
   lossless, block-sorting data compression.

   bzip2/libbzip2 version 1.0.6 of 6 September 2010
   Copyright (C) 1996-2010 Julian Seward <jseward@bzip.org>

   This program, "bzip2", the associated library "libbzip2", and all
   documentation, are copyright (C) 1996-2010 Julian R Seward.  All
   rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met:

   1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

   2. The origin of this software must not be misrepresented; you must 
   not claim that you wrote the original software.  If you use this 
   software in a product, an acknowledgment in the product 
   documentation would be appreciated but is not required.

   3. Altered source versions must be plainly marked as such, and must
   not be misrepresented as being the original software.

   4. The name of the author may not be used to endorse or promote 
   products derived from this software without specific prior written 
   permission.

   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
   OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
   GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

   Julian Seward, jseward@bzip.org
   bzip2/libbzip2 version 1.0.6 of 6 September 2010
   ------------------------------------------------------------------ */


#include "bzlib_private.h"

/*---------------------------------------------------*/
#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))

#define ADDWEIGHTS(zw1,zw2)                           \
   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))

#define UPHEAP(z)                                     \
{                                                     \
   Int32 zz, tmp;                                     \
   zz = z; tmp = heap[zz];                            \
   while (weight[tmp] < weight[heap[zz >> 1]]) {      \
      heap[zz] = heap[zz >> 1];                       \
      zz >>= 1;                                       \
   }                                                  \
   heap[zz] = tmp;                                    \
}

#define DOWNHEAP(z)                                   \
{                                                     \
   Int32 zz, yy, tmp;                                 \
   zz = z; tmp = heap[zz];                            \
   while (True) {                                     \
      yy = zz << 1;                                   \
      if (yy > nHeap) break;                          \
      if (yy < nHeap &&                               \
          weight[heap[yy+1]] < weight[heap[yy]])      \
         yy++;                                        \
      if (weight[tmp] < weight[heap[yy]]) break;      \
      heap[zz] = heap[yy];                            \
      zz = yy;                                        \
   }                                                  \
   heap[zz] = tmp;                                    \
}


/*---------------------------------------------------*/
void BZ2_hbMakeCodeLengths ( UChar *len, 
                             Int32 *freq,
                             Int32 alphaSize,
                             Int32 maxLen )
{
   /*--
      Nodes and heap entries run from 1.  Entry 0
      for both the heap and nodes is a sentinel.
   --*/
   Int32 nNodes, nHeap, n1, n2, i, j, k;
   Bool  tooLong;

   Int32 heap   [ BZ_MAX_ALPHA_SIZE + 2 ];
   Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
   Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; 

   for (i = 0; i < alphaSize; i++)
      weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;

   while (True) {

      nNodes = alphaSize;
      nHeap = 0;

      heap[0] = 0;
      weight[0] = 0;
      parent[0] = -2;

      for (i = 1; i <= alphaSize; i++) {
         parent[i] = -1;
         nHeap++;
         heap[nHeap] = i;
         UPHEAP(nHeap);
      }

      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
   
      while (nHeap > 1) {
         n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
         n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
         nNodes++;
         parent[n1] = parent[n2] = nNodes;
         weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
         parent[nNodes] = -1;
         nHeap++;
         heap[nHeap] = nNodes;
         UPHEAP(nHeap);
      }

      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );

      tooLong = False;
      for (i = 1; i <= alphaSize; i++) {
         j = 0;
         k = i;
         while (parent[k] >= 0) { k = parent[k]; j++; }
         len[i-1] = j;
         if (j > maxLen) tooLong = True;
      }
      
      if (! tooLong) break;

      /* 17 Oct 04: keep-going condition for the following loop used
         to be 'i < alphaSize', which missed the last element,
         theoretically leading to the possibility of the compressor
         looping.  However, this count-scaling step is only needed if
         one of the generated Huffman code words is longer than
         maxLen, which up to and including version 1.0.2 was 20 bits,
         which is extremely unlikely.  In version 1.0.3 maxLen was
         changed to 17 bits, which has minimal effect on compression
         ratio, but does mean this scaling step is used from time to
         time, enough to verify that it works.

         This means that bzip2-1.0.3 and later will only produce
         Huffman codes with a maximum length of 17 bits.  However, in
         order to preserve backwards compatibility with bitstreams
         produced by versions pre-1.0.3, the decompressor must still
         handle lengths of up to 20. */

      for (i = 1; i <= alphaSize; i++) {
         j = weight[i] >> 8;
         j = 1 + (j / 2);
         weight[i] = j << 8;
      }
   }
}


/*---------------------------------------------------*/
void BZ2_hbAssignCodes ( Int32 *code,
                         UChar *length,
                         Int32 minLen,
                         Int32 maxLen,
                         Int32 alphaSize )
{
   Int32 n, vec, i;

   vec = 0;
   for (n = minLen; n <= maxLen; n++) {
      for (i = 0; i < alphaSize; i++)
         if (length[i] == n) { code[i] = vec; vec++; };
      vec <<= 1;
   }
}


/*---------------------------------------------------*/
void BZ2_hbCreateDecodeTables ( Int32 *limit,
                                Int32 *base,
                                Int32 *perm,
                                UChar *length,
                                Int32 minLen,
                                Int32 maxLen,
                                Int32 alphaSize )
{
   Int32 pp, i, j, vec;

   pp = 0;
   for (i = minLen; i <= maxLen; i++)
      for (j = 0; j < alphaSize; j++)
         if (length[j] == i) { perm[pp] = j; pp++; };

   for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;

   for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];

   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
   vec = 0;

   for (i = minLen; i <= maxLen; i++) {
      vec += (base[i+1] - base[i]);
      limit[i] = vec-1;
      vec <<= 1;
   }
   for (i = minLen + 1; i <= maxLen; i++)
      base[i] = ((limit[i-1] + 1) << 1) - base[i];
}


/*-------------------------------------------------------------*/
/*--- end                                         huffman.c ---*/
/*-------------------------------------------------------------*/